Knowledge Base and Technical Support

Start a conversation

Gateway Pro BT

Product code: GWP1xxx

  • S. Coding – Media and Phone (GWP1V21)

    Only in case of Volkswagen, Skoda and Seat might the coding be required. By CAN BAP based systems (VW, Seat, Skoda – GWP1V21) the Media option is disabled (most cases) therefore the car has to be code...

  • T. No sound only control on BMW

    This problem could appear on 2 specific cases: The car has DSP The iPod Dock cable is not connected or wrongly connected DSP: If the car has DSP, the Gateway is officially not compatible, due to limit...

  • U. Charging smartphones

    If it is possible it depends on more factors: The Gateway needs to add enough power (Gateway Pro BT has  1 Amp power output) The matching cable version needs to be used Please note: there are some new...

  • V. Function of CD1-CD6 (or buttons 1-6)

    The CD changer (and CAN) protocol is what the Gateway uses, so that the car can recognize it. This protocol is a little limited, therefore you only have the Next/Previous track buttons and CD1-CD6 (bu...

  • W. BMW 16:9 navigation: requirements and installation

    Normally you can pull out the radio head unit and connect the Gateway to the CD changer connector and the installation is done. In the case of the BMW 16:9 head unit this is different, because the CD ...

  • X. No sound on phone calls, or keeping the factory phone function

    If the phone function works, but without sound, then change the 4 pin Molex (phone audio cable) on the Gateway harness, making it sure the “GW Phone” is plugged in instead of “Factory Phone”, and you ...

  • Y. Gateway hardware versions, car side cables

    If you don't have the original package then on the bottom of your Gateway device you can find a white sticker with information on it: The Gateway Pro BT has three hardware versions: GWPC11B (compatibl...