Start a conversation

iGateway

  • Volume is distorted or low compare to other sources

    The iGateway has no USB port, therefore you need to use an iPod to change the volume output of the iGateway. You need to visit our homepage, especially the download section where the volume configurat...

  • Activation on VW – Median and/or Phone

    In case of CAN BAP based systems the Media option is disabled (most cases) therefore it has to be coded before or after the Gateway installation.The procedure is not difficult (takes 10 minutes approx...

  • Firmware update

    Firmware update procedure on iGateway is much more complicated compare to other devices because of the missing USB option, which means iPod can be used for that only.Please note: iPod touch and iPhone...

  • No sound from Navigation or phone (wires repopulation on BMW 17 PIN)

    Sometimes on BMW it may be possible that there is no sound when Navigation / phone is used.This might happen because the 10 pin Molex (white) connector (Dension piece) not all wires are present for th...

  • Factory phone sound does not audible (no sound)

    The iGateway uses the same harness as the Gateway Pro BT which has built-in phone function as well. On that cable there is a separate 4 pin Molex cable. These wires on the 4 pin Molex are the phone au...

  • There is no Text on display

    The iGateway is designed for vehicles where text display is available. It does not work properly in non-text mode, except on BMW where it can be used in that mode too. The most important things what y...